You must be logged in to be able to share via email!
Product Information
CB Electronicscb Electronics TG-2
AS TG-1 but with RS422 In and Out: Use with standards converter for making copies or will also slave PAL video @ 24fps..
$4 400.00
(see pricing note)
Important Pricing note:
In a few cases manufacturer restrictions prevent us from advertising our very best prices online. If you have any questions about this product, want to put together a package, and for the very best pricing, click here to contact us by emai
or:
TG-2
AS TG-1 but with RS422 In and Out:
Use with standards converter for making copies or will also slave PAL video @ 24fps..
The Timecode Gearbox is used whenever you have to mix code standards, normally because someone has supplied you with an Audio or Video and a different standard or Frame rate:-
Examples
The M & E track has been supplied with 29.97 fps SMPTE timecode and you are working with 25 fps EBU timecode.
You are dubbing the final mix to film at 24 fps and you are supplied with a dialogue tape recorded to 25fps Video.
The Timecode Gearbox may also be used to change standard/timecode value without gearbox action.
You are working with a system that does not recognise Drop frame code and you need to convert from Drop to Non Drop.
You have almost finished your Mix and a new video is supplied with a different timecode. The Synchronizer section of the TG-1 may be used to synchronize any non-linear VTR (V-Mod, V-1, Viper) or Dynamic scan VTR at a different frame rate.
You wish to prepare the music tracks for a 24fps film to a 25fps PAL video, you can use the TG-1 to slave the Video to 24fps so that there is no pitch shift on the final version.