RSPE Audio Solutions, Los Angeles Premier Pro Audio Dealer

Description

The S2X brings together the virtues of the classical 7inch woofer and tweeter combination by using ADAM innovative technologies and top-class materials.


The HexaCone 7inch-woofer is driven by a sophisticated magnet system with a 2inch voice coil creating a greater linear excursion. This produces more dynamics than one would assume in a monitor of such small proportions. As a result, in addition to the unsurpassed audio quality of the X-ART and A/B amplifier combination, this monitor surprises the listener with a very powerful, deep, but always tight and precise low end.


Optional digital input

All SX-models (except the S1X) can be optionally retrofitted with a 24 bit/192 kHz D/A Converter featuring an AES/EBU (XLR) and a SPDIF (RCA) inputs as well as a R/L/Mono switch.


The front panel

Six controls can be found on the new front panel. Input sensitivity is handled by two controls. One control allows for coarse settings (-20dB to +8dB), while the second is used for fine tuning in 0.5dB steps, ranging from -1.5dB to 2dB .
There are two controls for the lower frequencies. One is an equalizer at 80 Hz that boosts bass response sometimes desirable in popular music. The second is a shelf filter that allows the engineer to alter the frequencies below 150 Hz.
High frequencies can also be adjusted by two different controls. The first alters the high frequency volume (-2dB to +2dB), while the second is a shelf filter for frequencies above 6 kHz. Both the high and low shelf filters can raise or lower ±4 dB progressively within their frequency band.




Technical Data S2X
Active bass reflex speaker
Woofer     186mm (7inch) HexaCone
Tweeter     X-ART
Freq.response
(± 3 dB)     35Hz - 50kHz
Panel
Input/HF gain, Hi/Lo EQ
Built-in amplifiers     Woofer: 250W / 300W
Tweeter: 50W / 100W
Inputs     Analog: Balanced XLR
Digital (opt.): AES/EBU + SPDIF
H x W x D     370mm x 220mm x 320mm
(14.8 x 8.8 x 12.8)
Weight     10,8 kg (23.8 lbs)
Warranty     5 years